Serving the Clarksville area  ·  (931) 263-0128  ·  Open Mon-Sun 7am-7pm
📞 (931) 263-0128 Free Quote

Metal Roofing in Ridgetop, TN (37073) · Local Professionals

Clarksville Metal Roofing · Fast response in Ridgetop and the Clarksville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+249Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ridgetop sits up on the ridge above the Cumberland, and the wooded lots here take weather that never quite reaches the valley floor. If your roof is original to one of the 1970s or 1980s brick ranches off Ridgetop Road, or you own one of the newer builds tucked into the trees near Pleasant View, you already know how a spring squall can peel shingles and drop limbs in the same afternoon.

We are Clarksville Metal Roofing, and Ridgetop is one of the towns we serve most often out of our Clarksville shop. Folks call us after a storm drops a red oak limb on a thirty-year-old shingle roof, or when they are finally ready to stop patching and put on standing seam that will outlast the mortgage. We are fully insured, and we treat 37073 like our own backyard.

Metal Roofing in Ridgetop (37073)

Ridgetop is a ridge town, and that matters for roofs. The lots along Ridgetop Road and down toward the old Ridgetop school are cut into slopes, with mature oak and hickory canopy that keeps gutters full and shade on the roof most of the day. That shade is nice in July, but it also holds moisture and hides the first signs of fastener back-out on older shingle roofs. Down in the hollows off Greer Road, the ground stays wetter longer, and we often find fascia and decking soft where runoff has been splashing for years. Many homes here are on wells and septic, so we are careful about where we stage materials and how we manage runoff during tear-off. Tight driveways and low tree limbs mean we often hand-carry panels or use a smaller lift rather than a full-size boom truck.

We have replaced and repaired roofs across Ridgetop and the surrounding ridge, from the older homes near the Ridgetop ball fields to the newer construction off Highland Road. We know which streets are narrow, which driveways are steep, and which homeowners have HOA covenants that dictate panel color and profile.

Our services in Ridgetop

How a Job Works in Ridgetop

Step 1: Call us at (931) 263-0128 or send an email. We schedule a free on-site assessment, usually within a few days for non-emergencies and same-day or next-day for active leaks. We walk the roof, check the decking and flashing, and take photos so you can see what we see. You get a written estimate with line items, not a ballpark on a business card.

Step 2: Once you approve, we pull the permit with the appropriate local building department and schedule the work. In Ridgetop, tree cover and steep drives sometimes mean we stage panels on the lawn or use a conveyor, and we coordinate with any HOA on color and profile before ordering material. Most residential roofs take two to four days depending on size and weather.

Step 3: We clean up every day, and on the final day we walk the property with you, magnet-sweep the lawn and driveway for nails, and make sure gutters and downspouts are clear. We do not leave until you have seen the finished roof and signed off.

Metal roofing in Ridgetop runs roughly $8 to $10 per square foot for installation, with standing seam at the higher end and corrugated or ribbed panels starting around $5.50. A full replacement over existing shingles (retrofit) starts around $7 per square foot, and repairs like flashing or leak fixes start at $450. Screw replacement and re-fastening on an existing metal roof starts at $750. The biggest cost factors are roof size and pitch, how much decking needs repair, tree access, and whether you choose a coated or specialty metal. We give free estimates at (931) 263-0128, and we will tell you honestly if a repair makes more sense than a replacement.

My house is under big oaks off Ridgetop Road, and I get black streaks and moss on my shingles. Is metal a better choice here?
Yes, and we see this constantly on the shaded ridge lots. Asphalt shingles hold moisture and organic debris under tree canopy, which feeds algae and moss. A standing seam or metal shingle roof sheds leaves and pollen far better and does not support moss growth the same way. We can also add snow guards and gutters sized for heavy leaf drop.
A storm just dropped a limb through my roof near the Ridgetop ball fields. How fast can you get out?
Call (931) 263-0128. We prioritize active leaks and storm damage in Ridgetop and the surrounding area. We can usually get out same day or next day to tarp and inspect, then schedule the permanent repair. We also document the damage with photos for your insurance claim, though coverage decisions are up to your carrier.
What does a metal roof replacement cost on a typical three-bedroom ranch in 37073?
Most Ridgetop ranches fall in the $9,000 to $18,000 range for a standard replacement, depending on square footage, pitch, and whether we need to replace decking. Standing seam runs more than corrugated panels. We give a firm written estimate after a free inspection, so you are not guessing.
Do I need a permit to replace my roof in Ridgetop, and who handles it?
Ridgetop roofing permits are commonly required for a full replacement, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection with the local building department. We will tell you upfront what the fee and timeline look like for your address.
My neighbor's oak limbs hang over my roof line. Can you trim them, and does my HOA need to approve the metal color?
We do not trim trees, but we can recommend a tree service. For HOA approval, many Ridgetop subdivisions have covenants on roof color and panel profile. We can provide product samples and documentation to submit to your HOA before we order materials. Property line issues are between you and your neighbor, but we can show you exactly where the roof edge sits relative to the line.
Are you insured for work on my Ridgetop property?
Yes. We carry general liability and workers' compensation insurance.
What maintenance does a metal roof need in Ridgetop's climate?
Not much, but a yearly inspection helps. We check fasteners, sealant around flashing and vents, and clear gutters of leaf debris. On shaded lots, keep the roof free of limbs and debris. Ice dams are occasional here, and snow guards help on steep north-facing slopes. We offer free estimates for inspections at (931) 263-0128.
Why choose us?

Trusted professionals in Clarksville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Clarksville

All your work handled by qualified professionals in Clarksville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

249+ Verified Client Reviews in Clarksville

⭐⭐⭐⭐⭐ 4.9/5 · 249 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Clarksville · Response within 24h · No commitment · ☎ (931) 263-0128

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Clarksville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm