Serving the Clarksville area  ·  (931) 263-0128  ·  Open Mon-Sun 7am-7pm
📞 (931) 263-0128 Free Quote

Metal Roofing in Dover, TN (37058) · Local Professionals

Clarksville Metal Roofing · Fast response in Dover and the Clarksville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+249Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Dover is the kind of town where the courthouse square still anchors daily life and the land rolls down toward the Cumberland and the Land Between the Lakes. A lot of the homes here are older shingle roofs on brick ranches and farmhouses, with newer builds tucked into the hills and lake-country lots off Highway 79. If your roof is showing its age, we can help.

Homeowners in Dover (37058) call Clarksville Metal Roofing because we know the difference between a roof that just looks worn and one that is actually failing at the fasteners after a Stewart County storm. We are based in Clarksville and serve Dover and the surrounding area, and we treat every property like it is down the road from our own shop.

Metal Roofing in Dover (37058)

Dover sits on rolling ground above the Cumberland River, and that matters for roofing. Many lots near the historic downtown and along the river bluffs have steep gables and tight side yards, so staging panels and getting equipment in and out takes planning. Out toward the lake and the rural edges of Stewart County, you get longer gravel drives, tree cover, and older barns and workshops that need practical metal solutions rather than a showroom pitch. The red clay and limestone underfoot also means drainage and gutter placement have to be thought through, especially where roofs shed into valleys and low spots.

Our team has worked across Dover and the Clarksville area long enough to know which roofs are candidates for a retrofit over existing shingles and which ones need a full tear-off. We also know the local building department has the final say on permits and inspection requirements, so we verify the rules for your address before we start. If your home is in a historic district or under HOA review, we help you pick a panel profile and color that will pass review without slowing the job down.

Our services in Dover

How a Job Works in Dover

Step 1: You call us at (931) 263-0128 or request a free estimate. We set up an on-site assessment, look at the roof, the flashing, the attic if accessible, and talk through what you are seeing. You get a clear written scope and a price before any work begins.

Step 2: Once you approve, we schedule the work around Dover weather and any permit timing. On tight lots near downtown or steep drives out toward the lake, we plan panel delivery and staging in advance so we are not blocking your neighbors or tearing up the yard. If your roof is under HOA or historic review, we coordinate that before materials are ordered.

Step 3: We clean up daily and do a final walkthrough with you. Magnets go over the lawn and drive for fasteners, gutters get checked, and we make sure you know what was done and what to watch for. We leave your property clean and your roof watertight.

Pricing in Dover depends on the size and pitch of your roof, how many layers are already there, access for panels and equipment, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Gutters for metal roofs start at $9 per linear foot, and snow guards and ice protection start at $1,200. Every roof is different, so call (931) 263-0128 for a free estimate and a real number for your Dover property.

My house is near the Dover courthouse square and has an older shingle roof. Is a metal retrofit over the shingles a good idea here?
Sometimes, yes. A retrofit can save you the cost of a tear-off, but code limits how many existing layers you can cover, and the deck has to be sound. We check the shingle condition, the flashing details, and the local building department rules for your address before recommending it. On many older Dover homes, a full replacement ends up being the better long-term call.
A storm just peeled back panels on my barn off Highway 79. How fast can you get out to Dover?
We treat storm and wind damage as a priority and offer a free inspection. Call (931) 263-0128 and we will schedule the soonest available visit, document the damage for your insurance claim, and make temporary repairs if needed to keep water out. We never promise coverage, but we do give you the paperwork your adjuster will want.
What does a typical metal roof replacement cost for a Dover ranch home?
Most Dover ranch homes fall in a range that depends on square footage, roof pitch, how many layers are there, and access. As a starting point, metal roof replacement begins at $9 per square foot, with standing seam at $10 and corrugated panel at $5.50. Call (931) 263-0128 and we will give you a free estimate based on your actual roof.
Do I need a permit to replace my roof in Dover, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in this area, but thresholds and inspection requirements vary. We verify the current rules with the local building department for your address and can walk you through what is needed. The building department has the final say, and we defer to them on every job.
My neighbor and I share a property line, and my new metal roof will shed water toward their yard. What should I do?
This comes up on tight Dover lots. We look at where the water will actually go and adjust gutter and downspout placement to keep it on your property where possible. If there is an HOA, we also help with the design review paperwork. For a true property-line dispute, you may need to check your plat or talk with the city, but we will make the roof work with the site.
Are you insured for roof work at my Dover property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before work starts so you and your property manager have it on file.
What should I do about leaves and debris on my metal roof in Dover before winter?
Dover's tree cover means gutters and valleys collect leaves and pollen through the fall. Keep gutters clear, check the fasteners and seals once a year, and look at the flashing around chimneys and skylights before the first hard freeze. If you are not comfortable on the roof, call (931) 263-0128 and we will inspect it and handle any small repairs before they turn into leaks.
Why choose us?

Trusted professionals in Clarksville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Clarksville

All your work handled by qualified professionals in Clarksville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

249+ Verified Client Reviews in Clarksville

⭐⭐⭐⭐⭐ 4.9/5 · 249 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Clarksville · Response within 24h · No commitment · ☎ (931) 263-0128

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Clarksville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm