Serving the Clarksville area  ·  (931) 263-0128  ·  Open Mon-Sun 7am-7pm
📞 (931) 263-0128 Free Quote

Metal Roofing in Coopertown, TN (37146) · Local Professionals

Clarksville Metal Roofing · Fast response in Coopertown and the Clarksville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+249Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Coopertown is where the pavement gives way to pasture, and the roofs have to keep up with the weather that rolls across those open fields. Most homes here sit on acreage lots off Highway 49 or Coopertown Road, a mix of new builds with wide, unshaded roof planes and older farmhouses that have seen a few decades of Tennessee storms. If you live out here, you already know the wind hits harder when there is nothing to break it.

That is why homeowners in 37146 call Clarksville Metal Roofing. We are based just up the road in Clarksville, and we have spent years working on roofs across Robertson County, from the new construction off Sowell Mill Pike to the older places tucked back in the tree lines. We know how this ground drains, how the sun hits a south-facing roof, and what a straight-line wind can do to a shingle roof that looked fine last spring.

Metal Roofing in Coopertown (37146)

Coopertown is spread out, and that changes the work. A lot of these properties have long driveways, wide roof spans, and no nearby trees to block the wind, which means panels take a beating and fasteners back out faster than they would in a tighter neighborhood. The ground is heavy red clay over limestone, so water moves slowly after a hard rain, and gutters that dump too close to the foundation will find their way into a crawlspace. We size gutters and plan drainage for that reality, not just for how the roof looks from the road.

We also see a lot of older barns and workshops on these tracts, plus new homes built with steep gables and big open roof planes that are a natural fit for standing seam. Our team handles everything from a full standing seam install on a new build to a repair on a 30-year-old corrugated roof that just needs a few panels and fresh screws. We are fully insured, with general liability and workers' compensation, and we pull permits through the proper local building department so the work is done right and documented.

Our services in Coopertown

How a Job Works in Coopertown

Step 1: You call us at (931) 263-0128, and we set up a free on-site assessment. We walk the roof, check the decking and flashing, look at how water is moving off the house, and talk through what you actually need. You get a written estimate with the scope and the price, no pressure and no surprises.

Step 2: Once you approve, we schedule the work and handle the permit with the local building department. On these larger Coopertown lots, we plan for material delivery and staging so we are not blocking your driveway or tearing up the yard. If your home is in an HOA or a historic review area, we help you get the panel profile and color approved before we order anything. The crew protects landscaping, sets up fall protection, and gets the roof dried in as quickly as the weather allows.

Step 3: When the job is done, we clean up. That means magnets over the grass for screws and clippings, a full gutter check, and a walkthrough with you so you can see the finished work and ask questions. We do not leave a job site until it is clean and you are satisfied.

Pricing in Coopertown depends on the size and pitch of your roof, how many layers are coming off, and how easy it is to get to. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs start at $450, screw replacement and re-fastening at $750, and gutter work runs about $9 per linear foot. A simple leak repair is usually on the lower end, while a full tear-off with new flashing and trim on a large acreage home will be higher. We give free estimates, so call (931) 263-0128 and we will put real numbers on your specific roof.

My house sits on an open lot off Highway 49 with no windbreak. Will a metal roof actually hold up better than shingles?
Yes, and we see it every week out here. Shingles on an exposed Coopertown lot take wind uplift at the edges and ridge, and once one tab lifts, the rest follow. A standing seam roof with concealed fasteners eliminates that failure point entirely, and the panels are rated for much higher wind speeds. We also check the decking and use the right underlayment, because the roof is only as good as what is under it.
A storm just peeled back part of my roof and it is leaking. How fast can you get to Coopertown?
Call us at (931) 263-0128 and we will get someone out as soon as we can, usually the same day or next day for an active leak. We do free storm and wind damage inspections, tarp or secure the area to stop further damage, and give you a written repair estimate. We document everything with photos so you have what you need for an insurance claim, though coverage decisions are up to your insurer.
What does a metal roof cost for a typical three-bedroom house in 37146?
For a ranch or two-story in the 1,800 to 2,500 square foot range, most Coopertown homeowners are looking at somewhere between $14,000 and $25,000 for a full install, depending on the panel type and how much trim and flashing is involved. A repair is usually a few hundred to a couple thousand. The biggest cost factors are roof size, pitch, tear-off, and access. We give free estimates so you get a firm number, not a guess.
Do I need a permit for a metal roof in Coopertown, and who handles it?
Most full replacements and re-roofs in this area require a permit, and the rules and fees are set by the local building department. We pull the permit for you and schedule the inspections, and we always confirm the current requirements with the jurisdiction before we start. If your project is in a historic district or an HOA, there may be design review on top of the building permit, and we help you navigate that too.
My neighbor says my new roof panels overhang the property line. How do we sort that out before installation?
It comes up more than you would think on these acreage lots. Before we order materials, we look at the survey and the setback lines with you, and we adjust the layout so the roof and gutters stay on your side. If there is an HOA, we get the color and profile approved in writing first. We would rather solve it on paper than have a dispute after the panels are on.
Are you insured for work on my Coopertown property?
Yes. That protects you if anything goes wrong on the job and covers our crew while they are on your property.
What should I do to maintain a metal roof in Coopertown between storms?
Keep the gutters and valleys clear of leaves and pollen, especially if you have oaks or tulip poplars nearby. Once a year, walk the perimeter and look for loose screws, lifted panels, or debris piled at the eaves. After a big storm, check for dents or punctures from limbs. We offer inspections and screw replacement, and catching a few backed-out fasteners early is a lot cheaper than chasing a leak later.
Why choose us?

Trusted professionals in Clarksville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Clarksville

All your work handled by qualified professionals in Clarksville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

249+ Verified Client Reviews in Clarksville

⭐⭐⭐⭐⭐ 4.9/5 · 249 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Clarksville · Response within 24h · No commitment · ☎ (931) 263-0128

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Clarksville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm