Licensed & Insured, in Clarksville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Clarksville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (931) 263-0128 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Clarksville and surrounding areas · On-site visits included · Free estimate within 24h
Clarksville Metal Roofing is a team of local certified professionals based in Clarksville. We respond quickly in Clarksville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (931) 263-0128⭐⭐⭐⭐⭐ 4.9/5 · 249 verified Google reviews
“We needed a metal roof on our equipment barn out here in the country and these guys handled the whole thing. The crew of four knocked it out in about three days and cleaned up every last screw and scrap piece before they left. Couldn't be happier with how it turned out.”
Commercial Metal Roofing
“Had them put a copper roof on our sunroom and it looks absolutely stunning. They were careful around all the existing trim and the flashing work is flawless. It was a small job but they treated it like it mattered.”
Copper & Specialty Metal Roofing
“Called them out to look at the barn roof before hay season and I'm glad I did. They found a bunch of loose fasteners and some flashing that was pulling away, fixed it all in one afternoon. Honest folks who didn't try to sell me a whole new roof I didn't need.”
Metal Roof Inspection
“Our brick house had the old shingles torn off and a new standing seam roof put on. Took about a week with a crew of five and they were respectful of the landscaping the whole time. The house looks like a completely different place now.”
Metal Roof Installation
“Had a leak around the vent pipe on our metal roof and they got it sorted fast. The flashing work is clean and they sealed everything up properly. Only reason it's four stars is scheduling took a little longer than I expected, but the actual repair was solid.”
Flashing & Skylight Repair
“Went with standing seam on our place and I'm so glad we did. The panels are perfectly aligned and the color matches exactly what we picked out. Crew was in and out in four days and you'd never know they were here except for the gorgeous new roof.”
Standing Seam Metal Roofing
“Replaced the old rusted metal roof on our house and the difference is night and day. They hauled off all the old panels and even re-hung a couple gutters that had pulled loose. Fair price and no surprises on the final bill.”
Metal Roof Replacement
“We did the metal-over-shingles retrofit on our brick home and it saved us a ton of hassle. No tear-off, no dumpster in the yard for weeks, just a clean install over the existing roof. Two days start to finish and they swept the whole driveway before leaving.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Clarksville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener metal roof | Starting at $8/sq ft | Includes tear-off, synthetic underlayment and standard trim. Pitch and deck repair move the price up. |
| Standing seam metal roof | Starting at $12/sq ft | Concealed fasteners and raised seams. Roof complexity and panel gauge drive the final number. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Textured profiles for HOA neighborhoods. Hail rating and panel style affect material cost. |
| Complex or large-scale job | On estimate | Steep gables, multiple valleys, dormers or historic trim need an on-site walk before pricing. |
| Travel | Included | In Clarksville and surrounding Montgomery County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (931) 263-0128, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes tear-off, underlayment, panels and basic trim on a standard pitch roof. |
| Mechanically seamed panels | Starting at $13/sq ft | Includes on-site roll-forming, concealed clips and double-lock seaming for maximum wind resistance. |
| Standing seam over existing shingles | Starting at $8/sq ft | Includes thermal break and panel install where local code allows a single-layer recover. |
| Complex roof or steep pitch | On estimate | Steep gables, multiple valleys and chimneys need an on-site look before we quote. |
| Travel | Included | In Clarksville and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (931) 263-0128, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic tear-off and metal panel installation | Starting at $9/sq ft | Includes removal of old roofing, decking inspection, underlayment, and standard panel installation. |
| Standing seam replacement | Starting at $12/sq ft | Concealed fasteners, premium underlayment, and custom flashing for complex roof lines. |
| Stone-coated steel or metal shingle replacement | Starting at $11/sq ft | Textured or stamped panels that mimic traditional roofing, with full tear-off and disposal. |
| Complex or large-scale replacement | On estimate | Steep pitch, multiple layers, rotten decking, or historic details require an on-site inspection. |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over one shingle layer | From $7/sq ft | Includes slip sheet, edge metal, standard flashing and permit; deck repairs and steep pitch add cost. |
| Standing seam retrofit over shingles | From $10 to $14/sq ft | Concealed fasteners, longer panel runs; price moves with pitch, valleys and chimney flashing complexity. |
| Metal shingle or stone-coated steel retrofit | From $11 to $16/sq ft | Includes profile-matched panels; HOA or historic district design review can add lead time. |
| Partial tear-off plus retrofit | On estimate | Needed when the deck is soft or the layer count exceeds code; requires an on-site look first. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (flashing, fasteners, sealant) | Starting at $450 | Includes diagnosis, basic sealant and fastener work, plus a written summary of findings. |
| Screw replacement and re-fastening | Starting at $650 | Covers pulling and replacing backed-out or rusted screws with new washers across a typical roof section. |
| Panel replacement (hail or impact damage) | Starting at $850 | Includes cutting out and replacing damaged panels, re-flashing the opening and water-testing the repair. |
| Large or complex repair | On estimate | Multi-area damage, steep pitch, chimney or skylight surrounds, or access under mature trees needs an on-site look. |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Covers diagnostic walk, source tracing, and one straightforward fix such as fastener or boot replacement. |
| Flashing and penetration repair | Starting at $650 | Rebuilds chimney, skylight, or pipe boot flashing with new metal and metal-rated sealant. |
| Multi-point or seam repair | Starting at $900 | Multiple leak points or seam work, priced by the number of failed locations found. |
| Emergency tarping after storm | Starting at $350 | Temporary weather-tight cover to stop active leaking until permanent repair is scheduled. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers a typical single-story roof with moderate failed fasteners, new washers, and a water test. |
| Full roof re-fastening | Starting at $1,450 | Replaces every fastener with oversized UV-rated screws; price scales with roof size and pitch. |
| Oversized screw retrofit | Starting at $950 | Steps up screw diameter where wind or age has wallowed out the original holes. |
| Purlin and deck repair | On estimate | Rotted framing must be inspected on site before we can quote the repair scope. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, basic gable | Starting at $5.50/sq ft | Includes panels, underlayment, eave trim and standard fasteners; steep pitch or deck repair raises it |
| R-panel roof, residential | Starting at $6.50/sq ft | Includes ribbed panels, closures and flashing; valleys and penetrations add cost |
| Retrofit over existing shingles | Starting at $6.00/sq ft | Includes panels and underlayment over the existing roof; layer count and deck condition affect price |
| Barn or shop building | On estimate | Span, pitch and access determine the panel and screw pattern, so we need an on-site look |
| Travel | Included | in Clarksville and surrounding Montgomery County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile | Starting at $9/sq ft | Installed with underlayment and standard trim; steeper pitch or tear-off raises the rate |
| Slate or shake profile | Starting at $11/sq ft | Premium textured panels with concealed fasteners; complex valleys and dormers add cost |
| Recover over existing shingles | On estimate | Depends on code-legal layer count and deck condition; we verify before quoting |
| Complex or large-scale job | On estimate | Steep historic roofs, multiple chimneys, and barn or commercial spans need an on-site look |
| Travel | Included | in Clarksville and surrounding Montgomery County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Shingle-profile stone-coated steel | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard trim; pitch and valley count move the price. |
| Shake-profile stone-coated steel | Starting at $11/sq ft | Includes concealed fasteners and deep-texture panels; steep historic gables and complex trim raise it. |
| Tile-profile stone-coated steel | Starting at $12/sq ft | Includes rounded profile panels and formed trim; roof complexity and color selection affect the total. |
| Deck repair and flashing rebuild | On estimate | Needs an on-site look at sheathing, valleys and chimney flashing before a number is given. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper pans and flashing; complexity of the detail moves the price. |
| Zinc or aluminum accent roofing | Starting at $18/sq ft | Formed to match existing profile; access and height of the roof section affect the rate. |
| Full copper standing seam roof | On estimate | Requires on-site measurement, historic review check, and fabrication plan before pricing. |
| Copper flashing and chimney work | Starting at $1,200 | Includes custom-bent copper flashing and soldered seams; chimney size and access move the price. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound standing seam roof | Starting at $2.50/sq ft | Includes wash, rust spot treatment, seam seal and one reflective topcoat on accessible slopes. |
| Elastomeric coating on corrugated or ribbed panels | Starting at $3.25/sq ft | Includes fastener replacement, rust conversion, primer and thicker film for light rust. |
| Heavy rust restoration with fastener replacement | On estimate | Rust severity, panel count and access drive the number, so we inspect before quoting. |
| Commercial and agricultural buildings | On estimate | Large square footage, height and equipment access require a full on-site scope. |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single flashing repair | Starting at $600 | Covers one chimney, skylight, or valley re-flash, including custom-bent metal and sealant. |
| Skylight curb rebuild | Starting at $900 | Includes curb framing repair, new flashing, and re-setting the skylight unit. |
| Multi-point flashing package | On estimate | Several joints on one roof need an on-site look to scope panel removal and access. |
| Travel | Included | In Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad guards over a single entry | Starting at $1,200 | Covers one or two rows above a porch or door, with row count driving the price. |
| Rail system on a long roof run | Starting at $2,400 | Covers a full eave run over a walkway or driveway, priced by linear feet. |
| Seam clamp installation on standing seam | Starting at $1,500 | Non-penetrating clamps sized to the seam spacing, with panel profile affecting cost. |
| Heat cable system with electrical tie-in | On estimate | Needs an on-site look at the eave, gutter, and power source before quoting. |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, attic, and gutter inspection with photos and a written repair-versus-replace assessment |
| Minor repair (screws, sealant, flashing) | Starting at $250 | Replaced fasteners, resealed laps, and reworked flashing on an accessible single slope |
| Panel section replacement | Starting at $650 | Cut-out and replacement of punctured or creased panels; price moves with pitch, height, and profile match |
| Post-storm full replacement | On estimate | Widespread hail or tornado damage needs an on-site scope before any number is given |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full walk-over with photos and written condition report on a typical single-family roof |
| Fastener and seam audit | Starting at $150 | Torque check and screw count on older corrugated and ribbed panel roofs |
| Leak trace inspection | Starting at $225 | Targeted moisture investigation and flashing review, priced by number of active leak points |
| Insurance and storm documentation | On estimate | Hail and wind damage report with dated photos, measurements and claim-ready formatting |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hidden hangers and basic downspout layout for a typical single-story run. |
| Oversized 6-inch trough with extra downspouts | Starting at $14/linear ft | Higher capacity for long panel runs and low-pitch roofs; price climbs with downspout count and run length. |
| Half-round steel or aluminum | Starting at $18/linear ft | Historic-profile trough with custom brackets; cost rises with story height and custom corner fabrication. |
| Leaf protection add-on | Starting at $6/linear ft | Screens or hoods fitted over the trough; heavier oak and tulip poplar canopy means more sections and outlets. |
| Complex or multi-story job | On estimate | Steep gables, bluff-lot access and custom corners need an on-site look before a firm number is given. |
| Travel and estimate | Included / Free | No mileage fee in Clarksville and surrounding areas; free written estimate at (931) 263-0128. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Agricultural barn or workshop repair | Free estimate | Includes roof inspection, fastener check, and written scope; price moves with panel count and access. |
| Corrugated panel installation on barn or shop | Starting at $3,500 | Covers tear-off, underlayment, and new panels; square footage and roof pitch are the main cost factors. |
| Standing seam commercial re-roof | On estimate | Requires on-site look at decking, insulation, and flashing details before quoting. |
| Travel | Included | in Clarksville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (931) 263-0128, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Clarksville need a crew that understands the local housing stock, not a call center three states away. Clarksville Metal Roofing connects you with a network of licensed, insured local contractors who live and work across Montgomery County. We handle metal roof installation, replacement, re-roofs, and repairs on everything from steep gabled Victorian homes near the Cumberland River bluffs to low-pitched brick ranches in Hilldale and newer subdivisions out toward Sango and Rossview.
Our service area includes Clarksville, Adams, Cedar Hill, Pleasant View, Cumberland City, and the surrounding rural stretches. We know the red clay, the heavy oak and hickory canopy, the pop-up storm seasons, and the large stock of 15 to 30 year old screw-down roofs whose fasteners are due for service. Whether you need a full replacement or a targeted repair, we start with straight guidance on what your roof actually needs.
Most metal roof leaks in Clarksville trace back to a handful of predictable failure points. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Seams separate as panels expand and contract through hot summers and cool winters. Pipe boots, chimney flashing, skylight curbs, and valley transitions fail as sealant ages out. Wind-lifted panels after a straight-line storm or fallen limbs from the tree canopy create punctures and open laps. None of these are mysterious, and all of them are repairable.
Ignoring a small leak is what turns it into an expensive one. Water tracks along purlins and decking well away from the entry point, so a stain on your ceiling may sit feet from the actual breach. By the time it shows, sheathing can be rotting and insulation can be saturated. That is why we chase the source, not the symptom, and document what we find before recommending work.
Our honest rule is simple: if the panels are sound and the issue is fasteners, flashing, or a localized breach, a metal roof repair or full screw replacement often restores a watertight roof for a fraction of replacement cost. If panels are corroded through, seams are failing across the field, or the deck is compromised, replacement is the better money. Call (931) 263-0128 to talk through your leak, or request a free estimate and we will give you the straight answer.
We install the full range of metal systems, and we match the system to the home. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, clean lines, and long service life. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. Metal Shingle Roofing and Stone-Coated Steel Roofing suit homeowners who want a traditional look with metal durability, and Copper & Specialty Metal Roofing handles accents, bays, and porches.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain. Screw-down costs less and needs its fasteners serviced over its life. We also offer Metal Roof Over Shingles (Retrofit) when the deck is sound and code allows, and we recommend tear-off when it is not.
Metal roof projects in Clarksville are typically quoted per square foot for installations and often flat-rate for repairs. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof rather than a ballpark.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements, thresholds, fees, and inspection steps vary by city and county. Historic district or HOA design review can also affect panel profile and color choices. We handle the paperwork we are allowed to handle and defer to the local building department on the rules.
Requirements vary, always verify with the Clarksville building or planning department before starting your project. If you have questions about how permitting affects your timeline, contact us and we will walk you through what we know.
Ready to get started? Clarksville Metal Roofing serves in Clarksville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Clarksville · Response within 24h · No commitment · ☎ (931) 263-0128
Your Free Quote Request