Serving the Clarksville area  ·  (931) 263-0128  ·  Open Mon-Sun 7am-7pm
📞 (931) 263-0128 Free Quote

Metal Roofing in Clarksville, TN (37040) · Local Professionals

Clarksville Metal Roofing · Fast response in Clarksville and the Clarksville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+249Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Clarksville's rooftops tell the city's story: steep Queen Anne gables on the bluffs near Historic Downtown, low brick ranches in Hilldale and Cumberland Heights, and rows of vinyl-and-brick subdivisions out toward Sango and Rossview. The housing stock spans more than a century, and the weather here, humid summers, spring and fall tornado outbreaks, hail, and the occasional ice storm, punishes every one of them.

Homeowners in 37040 call Clarksville Metal Roofing because we know how red clay, limestone, and heavy tree cover affect a roof. From the oaks and hickories dropping limbs in Greenwood to the pollen and leaf debris that clog valleys near the Cumberland River, we've seen what fails and why. We're fully insured and we work across Clarksville and the surrounding county.

Metal Roofing in Clarksville (37040)

Clarksville sits on rolling red clay and limestone in the Highland Rim, and that ground moves with the seasons. On the bluffs near downtown, steep gabled roofs and tight lots mean we plan staging carefully and often hand-carry materials. In the 1950s-70s brick ranches around Austin Peay, low-pitched shingle roofs are prime candidates for a metal retrofit, but attic ventilation and deck condition have to be checked first. Out in Sango, Rossview, and Cunningham, newer subdivisions have HOA design rules that can restrict panel profiles and colors, so we review those before ordering material. Rural farmhouses and barns across Montgomery County often need snow guards and ice protection at the eaves, and heavy leaf drop in the creek bottoms means gutters and flashing get extra attention.

Our team has installed, repaired, and replaced metal roofs on Victorian homes, tobacco-era farmhouses, and modern builds alike. We know which fasteners hold in this climate, how to detail valleys under hardwoods, and why standing seam and corrugated panels have become common sights here.

Our services in Clarksville

How a Job Works in Clarksville

Step 1: Call (931) 263-0128 or request a free estimate. We schedule an on-site assessment, inspect the roof and attic, check flashing and fasteners, and talk through options. You get a written scope and a clear price before any work begins.

Step 2: We handle permits and, where applicable, HOA submittals. On tight downtown lots or steep drives in Cumberland Heights, we plan delivery and staging to keep access clear. Crews are fully insured, and we protect landscaping and walkways. Installation or repair follows the manufacturer's specs for our wind and hail exposure.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We don't leave until you've seen the work and understand the warranty.

Pricing in Clarksville depends on roof size, pitch, access, deck condition, and urgency. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, replacement around $9, and standing seam around $10. Stone-coated steel and metal shingle systems start around $9. Repairs and leak repairs start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs around $9 per linear foot. Storm and wind damage inspections are free. Call (931) 263-0128 for a free estimate tailored to your property.

My 1950s brick ranch in Hilldale has a low-pitch shingle roof. Can you install metal over it?
Often yes, but we check deck condition, attic ventilation, and local code limits on existing layers first. A retrofit with corrugated or ribbed panels can work well on low slopes when detailed correctly, and we'll tell you honestly if a tear-off is the better call.
A storm just peeled back panels on my roof near Greenwood. How fast can you respond?
We prioritize active leaks and wind damage. Call (931) 263-0128 and we'll schedule an inspection, usually within a day or two depending on storm volume. We can tarp or secure the roof to prevent further damage and document everything for your insurer.
What does a typical metal roof replacement cost in Clarksville?
Most full replacements fall between $9 and $14 per square foot installed, depending on panel type, roof complexity, and whether we tear off existing shingles. Standing seam runs higher, around $10 to $16. We give a fixed written price after inspecting the roof.
Do I need a permit for a metal roof in Clarksville, and does the historic district have extra rules?
A permit is commonly required for a full replacement or re-roof, and thresholds vary. If you're in a historic district or HOA, design review may restrict panel profile and color. We recommend confirming current requirements with the City of Clarksville website or the local building department before ordering materials.
My neighbor's tree drops limbs on my roof, and my HOA wants a specific metal color. How do we handle that?
We can provide color samples and manufacturer specs for HOA submittals. For property-line issues, we document the roof condition before work and keep staging on your side. If a limb from a neighbor's tree caused damage, your insurance company can advise on liability.
Are you insured for work on my Clarksville property?
Yes. Our crews are fully insured.
What maintenance does a metal roof need in Clarksville's climate?
Check fasteners and seals annually, keep valleys and gutters clear of leaves and pollen, and inspect after hail or high wind. Ice dams can form at the eaves during winter storms, so snow guards and proper flashing matter. We offer inspections and tune-ups.
Why choose us?

Trusted professionals in Clarksville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Clarksville

All your work handled by qualified professionals in Clarksville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

249+ Verified Client Reviews in Clarksville

⭐⭐⭐⭐⭐ 4.9/5 · 249 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Clarksville · Response within 24h · No commitment · ☎ (931) 263-0128

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Clarksville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm